oru.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Theoretical and experimental analysis of hydropiercing
Volvo Car Corporation, Olofström, Sweden.ORCID-id: 0000-0001-8542-9006
Volvo Car Corporation, Olofström, Sweden.
Sapa Profiles.
Sapa Profiles.
2003 (Engelska)Ingår i: SAE technical paper series, ISSN 0148-7191, artikel-id 2884Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

In this study, hydropiercing after hydroforming and prior to unloading was investigated. The primary purpose of this study was to investigate how the used hydropiercing method and the selected material and process parameters affect the hole quality. Hydropiercing inwards, hydropiercing by folding the ’scrap’ piece inwards and hydropiercing outwards were tested. The tube material was extruded AA6063-T4. The tube diameter and wall thickness were 107 mm and 2.5 mm respectively. Straight 1110-mm long tubes of this material were first hydroformed at 1300 bar and then hydropierced. Assuming that the largest (in magnitude) acceptable deflection at the hole edge is 0.2 mm, hydropiercing inwards at ≥ 1300 bar yield the best hole quality. However, the remaining scrap piece (in the tube) causes a handling problem that must be solved.

Ort, förlag, år, upplaga, sidor
Society of Automotive Engineers, 2003. artikel-id 2884
Nyckelord [en]
Experimental analysis; Hole edge; Hole quality; Long tubes; Process parameters; Tube diameters; Wall thickness, Unloading, Tubes (components)
Nationell ämneskategori
Annan materialteknik
Identifikatorer
URN: urn:nbn:se:oru:diva-55293DOI: 10.4271/2003-01-2884Scopus ID: 2-s2.0-84881215336OAI: oai:DiVA.org:oru-55293DiVA, id: diva2:1071264
Tillgänglig från: 2017-02-03 Skapad: 2017-02-03 Senast uppdaterad: 2017-11-29Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Sök vidare i DiVA

Av författaren/redaktören
Asnafi, Nader
I samma tidskrift
SAE technical paper series
Annan materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 390 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf