Produktutveckling av ett automatiskt växtbevattningssystem
2020 (Swedish)Independent thesis Basic level (university diploma), 10 credits / 15 HE credits
Student thesis
Abstract [sv]
Det är känt att levande växter i hemmet vanligtvis kräver mänsklig tillsyn för att upptäcka när de är i behov av bevattning. Idag bevattnas växter manuellt i stor utsträckning i hemmet och det krävs alltså att någon håller uppsikt och observerar när varje individuell växt behöver bevattnas och i rätt mängd för att växten skall trivas. Om detta inte görs riskerar växten att tillslut dö. I privata sammanhang, i hemmet, uppstår ofta en större problematik med hur bevattningen ska skötas under perioder då hemmet är tomt som vid exempelvis bortaresande. Vissa växter kan behöva bevattnas flera gånger i månaden. Vid innehav av flera växter kan bevattningsprocessen upplevas tidsödande och detta kanske inte ses som någon uppskattad vardagsaktivitet enligt alla. Detta är det problem som projektet i denna rapport behandlar. Det vill säga hur bevattning av krukväxter i hemmet kan automatiseras för att minska tillsynsbehovet. Problemet behandlas genom att använda sig av en strukturerad produktutvecklingsmetod som beskrivs av Karl T. Ulrich och Steven D. Eppinger, en metod som beskrivs effektiv i produktutvecklingssamanhang. Utifrån faktainsamling om bland annat växters fotosyntes har slutsatser om hur en växt behöver skötas tagits fram och implementerats i produkten. Produktutvecklingen resulterar i en produkt som rymmer 2 liter vatten som kan förse två krukväxter med vatten i upp till 8 veckor, samt förse växterna med artificiellt solljus vid behov. Produkten är dessutom anpassningsbar efter vald växtsort som sker via en applikation, det vill säga bevattningssystemet anpassar sig till den växt som systemet är kopplad till på så sätt att den förser med rätt vattenmängd utifrån den fuktighet som den specifika växten kräver. Denna rapport kan användas i en eventuell vidareutveckling för att skapa ett automatiskt växtbevattningssystem som helt anpassar sig utefter den specifika växten, även när det kommer till det artificiella solljusets färgåtergivning för att maximera växtens tillväxt.
Abstract [en]
It is known that living plants require supervision to detect when they are in need of irrigation. Today, plants with manual supervision are widely watered in the home. It is therefore required that someone watches and observes when each individual plant needs to be watered and irrigated in the right amount for the plant to thrive. If this is not done, the plant will eventually die. In private contexts, in the home, there is often a bigger problem with how the irrigation should be handled during periods when the home is empty, such as for example when traveling away. Some plants may need watering several times a month. In the possession of several plants, the irrigation process can be time-consuming, and this may not be seen as an estimated everyday activity according to everyone. This is the problem that the project in this report addresses. That is, how irrigation of houseplants in the home can be automated to reduce the need for supervision. The problem is addressed using a development method described by Karl T. Ulrich and Steven D. Eppinger, a method that is described as effective in product development contexts. Based on factual gathering on plant photosynthesis, conclusions on how a plant needs to be cared for have been developed and implemented in the product. The product development results in a product that holds 2 liters of water that can supply two pot plants with water for up to 8 weeks and provide the plants with artificial sunlight if needed. In addition, the product is adaptable to the chosen plant type that is done via an application, that is, the irrigation system adapts to the plant to which the system is connected in such a way that it supplies the right amount of water based on the moisture required by the specific plant. This report can be used in future developments and further developed to create an automatic plant irrigation system that fully adapts to the specific plant, even when it comes to artificial sunlight's color rendering to maximize its growth.
Place, publisher, year, edition, pages
2020. , p. 73
Keywords [en]
plants, flowers, automatic, irrigation
Keywords [sv]
växter, blommor, automatiskt, bevattning
National Category
Mechanical Engineering
Identifiers
URN: urn:nbn:se:oru:diva-86344OAI: oai:DiVA.org:oru-86344DiVA, id: diva2:1474299
Subject / course
Mechanical Engineering
Supervisors
Examiners
2020-10-082020-10-082020-10-08Bibliographically approved