Analys av ljudutbredning och dämpningsmöjligheter för mynningsknall och överljudsbang vid provskjutning av tung artilleripjäs
2013 (Swedish)Independent thesis Basic level (degree of Bachelor), 10 credits / 15 HE credits
Student thesisAlternative title
Analysis of sound propagation and attenuation options for the muzzle blast and the sonic boom of the test firing of heavy artillery (English)
Abstract [sv]
Detta arbete är gjort i syfte att undersöka problemet med buller vid skjutning av grovkalibriga vapen och att dämpa problemen. Problemet består av tre delar. Kanonens mynningsknall, överljudsbangen från projektilen samt brisaden. Brisaden undersöks inte i detta arbete. Mätningar har gjorts för att förstå problemet och analysera de olika smällarna. Teoretiska idéer har framlagts för dämpning. Test har gjorts av nerskalad bullerbarriär.
Ljudutbredning utomhus är mycket komplex. Påverkande faktorer för utbredningen har undersökts.
Överljudsbangen är en stor faktor kring bullret i Bofors. En teoretisk modell lades fram för att finna var överljudsbangen börjar och vad en eventuell dämpning av kanonen skulle ge för effekt. Mätningar gjordes runt om kanonen för att verifiera teorin. Resultatet blev misslyckat för att värdena inte visade någon synbar skillnad.
För att undersöka överljudsbangens utbredning gjordes mätningar runt om Bofors Test Center. Bangens styrka är beroende av utgångshastigheten hos projektilen. Styrkan i chockvågen från projektilen är beroende av avstånd.
Överljudsbangen har visat sig vara näst intill omöjlig att dämpa då den är kontinuerlig med kulbanan.
Abstract [en]
The purpose of this work is to investigate the problems of noise due to shooting with large caliber guns and find a way to attenuate the sound. The problem consists of three parts, the muzzle blast, the sonic boom and the burst. The burst won’t be considered in this investigation. Measurements have been made to understand the problem and analyze the different blast waves. Theoretical ideas of damping have been presented. A scaled test of a noise barrier has been made.
The propagation of sound outdoors is very complex. The affecting elements are investigated.
The sonic boom is a significant factor in the noise around Bofors. A theoretical model was made to find the beginning of the sonic boom in purpose to tell where a possible damping of the muzzle blast will have an effect. Measurements were made around the cannon to verify the theory. The result was a failure because the measurements had no visible difference.
Measurements were made around Bofors Test Center to find the length of the propagation in sonic booms. The strength of the shockwave is dependent on the distance. The sonic boom is almost impossible to attenuate.
Place, publisher, year, edition, pages
2013. , p. 53
National Category
Electrical Engineering, Electronic Engineering, Information Engineering
Identifiers
URN: urn:nbn:se:oru:diva-36281OAI: oai:DiVA.org:oru-36281DiVA, id: diva2:742752
Subject / course
Electronics Engineering
Supervisors
Examiners
2014-09-112014-09-022017-10-17Bibliographically approved