To Örebro University

Effective early warning systems for aquatic contamination require monitoring strategies capable of detecting subtle, long-term shifts in mixture-driven biological activity. Suspended particulate matter (SPM) serves as a carrier and reservoir for complex contaminant mixtures, facilitating their transport and persistence in aquatic systems, yet systematic toxicological time series for archived SPM remain scarce. Regulatory monitoring predominantly targets Priority Substances and River Basin Specific Pollutants, leaving the temporal trends of particle-associated mixture toxicity largely unresolved. Leveraging 18 years (2005–2022) of cryogenically archived annual SPM composites from the Rhine River, we conducted a spatiotemporal effect-based assessment integrating receptor-mediated effects, oxidative stress analysis and untargeted Cell Painting phenomics. This integrated toolbox enabled evaluation of pathway-specific responses and multi-compartment cellular perturbations associated with particle-bound contaminant mixtures. Polar SPM-associated chemicals elicited oxidative stress response and caused endocrine disruption through estrogen receptor α (ERα) activation and androgen receptor inhibition (anti-AR). Trend analysis showed spatiotemporal variation along the river, with statistically increasing trends of oxidative stress and anti-AR activity over time at Koblenz, driven by polar chemicals. Both polar and non-polar SPM extracts activated the aryl hydrocarbon receptor (AhR), indicating presence of compounds capable of triggering xenobiotic response pathways. Several subcellular compartments were affected, with mitochondrial features being among the most affected. These findings demonstrate that SPM-associated chemicals elicit diverse toxicological effects by acting on several receptors and impacting diverse cellular structures. Combining targeted and phenomics-based effect approaches provided comprehensive mechanistic insights and valuable information to support the early warning systems for chemical contamination in aquatic environments.

The continuous release of synthetic chemicals into aquatic systems underscores the need for long-term assessments of contaminants of emerging concern (CECs). Archived suspended particulate matter (SPM) samples from the German Environmental Specimen Bank (ESB) (2005–2022) at two Rhine sites (Weil am Rhein and Koblenz) were analyzed using liquid chromatography–high-resolution mass spectrometry (LC-HRMS) suspect/non-target screening (SS/NTS) to evaluate temporal trends. Using retention-time indices and orthogonal MS/MS evidence (mzCloud, FISh, CFM-ID), 332 compounds were identified at varying Schymanski confidence levels (2.1: 3.0%; 2.2: 5.7%; 3.1: 53%; 3.2: 38%). Temporal analysis of LC-HRMS peak areas revealed that 25% of contaminants increased over time, with a higher proportion at Koblenz (29%) than Weil (18%). Conversely, several compounds exhibited statistically significant decreasing trends at both Koblenz (14%) and Weil sites (13%), consistent with regulatory measures, improved wastewater treatment, and shifts in industrial practices. Aquatic toxicity prediction (ECOSAR) indicated that 47% (154 of 332) of annotated structures were highly acutely toxic (LC₅₀/EC₅₀ ≤ 1 mg/L) to at least one test group (fish, Daphnia, or green algae). This study provides the first 18-year, site-specific non-target time series from a national archive and integrating orthogonal identification with hazard prediction to support chemical prioritization. Archived SPM enables retrospective and comparable assessment of particle-associated contaminants, complementing dissolved-phase monitoring, and supporting the identification of unmonitored emerging CECs. Crucially, long-term NTS of these SPM samples provides screening-level early-warning signals and a watch list for targeted confirmation and risk management.

As the volume of plastic waste from electrical and electronic equipment (WEEE) continues to rise, a significant portion is disposed of in the environment, with only a small fraction being recycled. Both disposal and recycling pose unknown health risks that require immediate attention. Existing knowledge of WEEE plastic toxicity is limited and mostly relies on epidemiological data and association studies, with few insights into the underlying toxicity mechanisms. Therefore, this study aimed to perform comprehensive chemical screening and mechanistic toxicological assessment of WEEE plastic-associated chemicals. Chemical analysis, utilizing suspect screening based on high-resolution mass spectrometry, along with quantitative target chemical analysis, unveiled numerous hazardous compounds including polyaromatic compounds, organophosphate flame retardants, phthalates, benzotriazoles, etc. Toxicity endpoints included perturbation of morphological phenotypes using the Cell Painting approach, inflammatory response, oxidative stress, and endocrine disruption. Results demonstrated that WEEE plastic chemicals altered the phenotypes of the cytoskeleton, endoplasmic reticulum, and mitochondria in a dose-dependent manner. In addition, WEEE chemicals induced inflammatory responses in resting macrophages and altered inflammatory responses in lipopolysaccharide-primed macrophages. Furthermore, WEEE chemicals activated the nuclear factor erythroid 2-related factor 2 (Nrf2) pathway, indicating oxidative stress, and the aryl hydrocarbon receptor (AhR). Endocrine disruption was also observed through the activation of estrogenic receptor-α (ER-α) and the induction of anti-androgenic activity. The findings show that WEEE plastic-associated chemicals exert effects in multiple subcellular sites, via different receptors and mechanisms. Thus, an integrated approach employing both chemical and toxicological methods is essential for comprehensive assessment of the toxicity mechanisms and cumulative chemical burden of WEEE plastic-associated chemicals.

Per- and polyfluoroalkyl substances (PFAS) and fluorinated ionic liquids were investigated in municipal effluents from 30 wastewater treatment plants (WWTPs) across 15 European countries using supercritical fluid chromatography-high-resolution mass spectrometry (SFC-HRMS) for nontarget screening. Bis-perfluoroalkyl sulfonimide (bis-FASI) ionic liquids were detected as bis(trifluoromethanesulfonyl)imide (NTf2-), two rarely reported homologues (±2 CF2, namely FSI- and BETI-), and two previously unreported homologues (±1 CF2, namely FTFSI- and FTNTf2-). Bis-FASIs were present in 85% of samples and were more abundant in effluents from larger WWTPs. The fluorinated anion PF6-, commonly used in ionic liquids, was found in all samples (≤3 μg/L). Hexafluoroarsenate (AsF6-), reported here for the first time in municipal wastewater, was detected in 32% of samples in eight countries. PF6- and AsF6- concentrations exceeded those of traditional PFSAs and PFCAs in 97% of the samples. No removal was detected for perfluorinated compounds, inorganic anions, and low-fluorinated pharmaceuticals and pesticides. Low-fluorinated substances were detected in 90% of samples (>100 ng/L), yet PF6- alone surpassed the combined concentration of all low-fluorinated substances in 27 out of 30 samples. These results reveal the significance of unconventional fluorinated substances for the overall fluorine load in wastewater, highlighting the need to extend monitoring strategies beyond legacy PFAS.

Drinking water producers have a far-reaching responsibility to provide safe, clean and wholesome drinking water, using water resources possibly effected by the thousands of chemicals used in societies’ daily life. This study has monitored chemical hazards in drinking water from source to tap, using effect-based methods. The study was conducted at a Swedish drinking water treatment plant sourcing lake water and aimed to investigate potential seasonal variations in both the raw water and water after different treatment steps. Furthermore, a granular activated carbon (GAC) pilot facility was evaluated. Samples were analyzed for estrogenicity, androgenicity, aryl hydrocarbon receptor (AhR) activity, oxidative stress (Nrf2) response and genotoxicity (micronucleus formation). We observed seasonal differences in oxidative stress and genotoxic effects in both raw and drinking water with higher activities during the late fall of each year. The removal efficiency for both oxidative stress and genotoxicity was limited in the full-scale treatment process and occasionally the genotoxicity was also detected in outgoing drinking water from the treatment plant and in samples collected at consumers tap on the distribution network. AhR activity was present in all raw water samples and the removal was limited. Estrogenic activities were observed in most of the raw water samples but in contrast to the other parameters estrogenicity was effectively reduced by the full-scale conventional treatment. The GAC pilot treatment was generally more efficient than the full-scale conventional treatment in removing all observed bioactivities and could be a viable complement to the current treatment to assure drinking water free from genotoxic compounds. Genotoxic activities in drinking water was observed while all currently regulated chemical parameters were fulfilled. This highlights the need for effect-based monitoring in efforts to ensure the chemical safety of drinking water, as target chemical analysis of single compounds will overlook both unknown hazardous compounds as well as potential mixture effects.

Studies on cow's milk have mainly focused on analyzing specific chemical groups and natural components. Therefore, in this study, we evaluated if effect-based in vitro methods could be used as a screening tool to monitor chemical hazards in milk. In total, 32 milk samples were collected from a Swedish dairy company throughout one year. These samples included conventional and organic semi-skimmed as well as raw milk. The milk samples were tested in five in vitro methods covering eight endpoints. These endpoints included cytotoxicity, endocrine disruption (estrogen/androgen induction/inhibition), aryl hydrocarbon receptor activity, oxidative stress and DNA damage. Estrogen and androgen receptor inhibition, in addition to aryl hydrocarbon receptor activity, were the most responsive endpoints, where 10 to 13 out of the 32 milk samples were bioactive. Organic and conventional milk showed no major differences. Overall, no or only low activities were observed in milk samples in the remaining in vitro assays, which is a promising result with regard to applying effect-based methods as a screening tool. Concerning the most responsive assays, more research is needed to understand the normal background variations before they can be used as a screening tool for chemical hazards in milk. 

Liquid smoke products are widely used as a food additive to create a desired smoke flavour. These products may contain hazardous chemicals generated during the wood-burning process. However, the toxic effects of these types of hazardous chemicals constituting in the commercially available products are largely unknown. Therefore, a test battery of cell-based in vitro methods, covering different modes of actions of high relevance to human health, was applied to study liquid smoke products. Ten liquid smoke flavourings were tested as non-extracted and extracted. To assess the potential drivers of toxicity, we used two different solvents. The battery of in vitro methods covered estrogenicity, androgenicity, oxidative stress, aryl hydrocarbon receptor activity and genotoxicity. The non-extracted samples were tested at concentrations 0.002 to 1 μL liquid smoke flavouring/mL culture medium, while extracted samples were tested from 0.003 to 200 μL/mL. Genotoxicity was observed for nearly all non-extracted and all hexane-extracted samples, in which the former had higher potency. No genotoxicity was observed for ethyl acetate-extracted samples. Oxidative stress was activated by almost all extracted and non-extracted samples, while approximately half of the samples had aryl hydrocarbon receptor and estrogen receptor activities. This study used effect-based methods to evaluate the complex mixtures of liquid smoke flavourings. The increased bioactivities seen upon extractions indicate that non-polar chemicals are driving the genotoxicity, while polar substances are increasing oxidative stress and cytotoxic responses. The differences in responses indicate that non-extracted products contain chemicals that are able to antagonize toxic effects, and upon extraction, the protective substances are lost.

Background: Food contact articles are used in our everyday life and information regarding the potential health hazards of migrating chemicals for humans is scarce. In this study, an effect-based evaluation of non-polar extracts of food contact articles made of paper and board was conducted with a panel of eight bioassay endpoints. These, health-relevant endpoints, included oxidative stress, inflammation, genotoxicity, xenobiotic metabolism and hormone receptor effects.

Results: In total, 62 food contact articles were pooled into 19 groups, in which articles intended to be used for similar types of food item(s) were pooled, and extracted with acetone:n-hexane (1:4). These were then tested in the effectbased bioassays. Bioactivities were detected for multiple materials in six out of eight assays, the two assays showing no effects were NFκB and androgen receptor agonistic response. In essence, the detection rates of the tested non-polar extracts were 72% for antagonistic effects on the estrogen receptor, 72% for antagonistic effects on the androgen receptor, 47% for oxidative stress, 28% for agonistic effects on the estrogen receptor and 33% for genotoxicity. The bioequivalent concentrations ranges in extracts of 10 mg food contact article/mL cell culture media were: for oxidative stress from 2.45 to 5.64 μM tBHQ equivalents, estrogen receptor agonistic activity from 1.66 to 6.33 ρM estradiol equivalents, estrogen receptor antagonistic activity from 1.21 × 10–3 to 4.20 × 10–3 μM raloxifene equivalents and androgen antagonistic activity 0.08–0.46 μM hydroxyflutamide equivalents. The extracts that were bioactive in multiple assays were: baking moulds, boxes for popcorn, infant formula/skimmed milk, porridge/flour mixes, pizza, fries’ and hamburgers as well as packages for frozen food.

Conclusion: Non-polar extracts of food contact articles contain compounds that can activate molecular initiating events in toxicity pathways of high relevance to human health. These events included endocrine-disruptive activities, oxidative stress and genotoxicity. Effect-based methods proved to be a valuable tool for evaluating food package articles, as they can detect potentially hazardous effects of both known and unknown chemicals as well as potentialcocktail effects.

Food contact materials (FCMs) can contain hazardous chemicals that may have the potential to migrate into food and pose a health hazard for humans. Previous studies have mainly focused on plastic materials, while data on packaging materials made from paper and cardboard are limited. We used a panel of cell-based bioassays to investigate the presence and impact of bioactive chemicals on human relevant endpoints like oxidative stress, genotoxicity, inflammation, xenobiotic metabolism and endocrine system effects in extracts made from paper and cardboard. In total, 23 methanol extracts of commonly used paper and cardboard available on the Swedish market were extracted as a whole product using methanol to retrieve polar substances, and tested at concentrations 0.3–10 mg/mL and 0.2–6 mg/mL. At the highest concentration bioactivities were observed in a high proportion of the samples: oxidative stress (52%), genotoxicity (100%), xenobiotic metabolism (74%), antiandrogenic- (52%) and antioestrogenic receptor (39%). Packages of potential concern included cake/pastry boxes/mats, boxes for infant formula/skimmed milk, pizza boxes, pizza slice trays and bag of cookies. It should be noted that the extraction for packages like cake/pastry boxes can be considered exaggerated, as the exposure usually is shorter. It can be hypothesised that the observed responses may be explained by inks, coatings, contaminants and/or naturally occurring compounds within the material. To summarise, an effect-based approach enables hazard identification of chemicals within FCMs, which is a valuable tool for ensuring safe use of FCMs.